SofaRun 6.0 released

Страница 10/11
3 | 4 | 5 | 6 | 7 | 8 | 9 | | 11

By Louthrax

Prophet (2293)

Аватар пользователя Louthrax

15-04-2020, 10:55

Latok wrote:

Ah, I see. But does that also explain why the SCC is disabled when I start MUPLAY.COM or MGSEL.COM from within Sofarun? Then there is no 'disable SCC at start up' because Sofarun is already running. When I, within Sofarun, start another application that supports SCC, for example Trilotracker, the SCC does work.

Yeah, VGMPLay is also working correctly when launched from SofaRun. I think that SofaRun sets at startup (when muting SCC) something that MUPLAY or MGSEL do not like, I'll make some tests.

By gdx

Prophet (3817)

Аватар пользователя gdx

15-04-2020, 13:15

Louthrax wrote:

You did not reply to my question about the type of joypad you're using (original or clone). I've seen SNES clone pads not working at all with JoySNES (when they work very well with a real SNES), but no erratic behavior like described.

I have an original SNES controller and a clone. The problem is the same with both.
Yesterday I contacted Popolon and he doesn't have that issue either. So my JoySNES doesn't like the v.6.1. Sad

By Wolverine_nl

Paragon (1128)

Аватар пользователя Wolverine_nl

15-04-2020, 13:31

I will revert to an older version tomorrow and test if I have still issue with the controls in the menu via joystick or controller/JoyMega, and let you know here

By gdx

Prophet (3817)

Аватар пользователя gdx

15-04-2020, 13:41

I tested again with my Turbo R instead of on my MSX1 and the JoySNES works only in R800 mode.

By Vampier

Prophet (2357)

Аватар пользователя Vampier

16-04-2020, 18:32

louthrax is there a way to preserve the vgm/vgz extensions while unpacking in sofarun. VGMPlay doesn't recognize that the file has a VGZ extention and just flat out tells it can't play it because it's a zipped VMG. It could also be solved by Grauw implementing that if a VGZ is loaded with a different extension the VGZ will still play.

By Moniz

Champion (358)

Аватар пользователя Moniz

16-04-2020, 22:41

@Vampier: I had the same problem, but has been solved. You can check page 6 of this topic

By gdx

Prophet (3817)

Аватар пользователя gdx

03-05-2020, 15:38

gdx wrote:

I tested again with my Turbo R instead of on my MSX1 and the JoySNES works only in R800 mode.

Bug confirmed by another user!

By Louthrax

Prophet (2293)

Аватар пользователя Louthrax

03-05-2020, 15:50

gdx wrote:
gdx wrote:

I tested again with my Turbo R instead of on my MSX1 and the JoySNES works only in R800 mode.

Bug confirmed by another user!

I was hesitating to put a fix in SofaRun if the problem appears only only on some JoySnes (we can consider the problem should be fixed on the JoySnes side). I could still add an option to use the old code though (would prevent to use mouse to validate), I'll see!

By Skaepoy

Supporter (9)

Аватар пользователя Skaepoy

03-05-2020, 17:41

Hey, I've got a problem with getting .cas files to run straight from Sofarun. It always gives an error message, "Unable to open". I've tried starting .cas files unzipped and from within zip files, and neither works. The only way I've gotten any .cas files to work is by recording them on a real tape via the "write to cassette" method. My MSX is a Canon V-20, with 64k RAM, and I'm using 8bits4ever's device called SD512.

Another problem regarding SD512 and/or Sofarun I've noticed is, that it sometimes resets the MSX when trying to run a game .rom from HAL or sometimes Casio. I'm guessing this has something to do with some settings, but my expertise with MSX's is close to none.

I've tried looking for some help from the Sofarun threads, but have found none. A guy on a Facebook MSX group suggested to edit the .ini file, but I don't know what to edit, if the problem is in that. Help, please? Sad

By Popolon

Expert (67)

Аватар пользователя Popolon

04-05-2020, 10:48

Which is the best version for mister fpga? 6.0?
Thanks

Страница 10/11
3 | 4 | 5 | 6 | 7 | 8 | 9 | | 11