How MSX pseudo-stereo works?

Страница 3/3
1 | 2 |

By DarkSchneider

Paladin (941)

Аватар пользователя DarkSchneider

05-06-2017, 11:59

If you want my opinion, just mix all the audio into the same output. All those chips were mono, but the "stereo" is because the MSX-Audio had an output connector, so you would had MSX-Music from TV, and MSX-Audio from the external speakers connected to the cartridge.

I would not add any extra audio connection to the device as it could make it more expensive needlessly.

I even see an annoyance the need to connect external speakers to get audio on MSX. Everything from TV is best for me.

In other words:

Eugeny_Brychkov wrote:

As you know current version of GR8NET is mono and both OPLL and OPL are talking onto the same channel, going to MSX output.

Let it as is.

Grauw wrote:

Nice song! I’m thinking, with that it also finally makes sense to have the noise being able to output on all three channels Smile.

That would be great, but for the original PSG (damn Yamaha). Making an improved PSG today is not good in the meaning it couln't be used unless it would be standarized, and I think is not the case.

By DarkSchneider

Paladin (941)

Аватар пользователя DarkSchneider

05-06-2017, 13:14

In addition, as much, and if possible, simply allow to configure (but with the possibility to return it to the mono output) that MSX-Music will output from a channel and MSX-Audio from the other one, i.e. MSX-Music to left and MSX-Audio to right of the MSX output.
But notice as said it should be configurable to return to default behavior, because if not then when using only one of them (i.e. MSX-Music) it would sound only from a channel, annoying.

By st1mpy

Paladin (709)

Аватар пользователя st1mpy

21-02-2021, 02:51

About the FM Stereo Pak, it might just be mine but it does not output melody in one channel and rhythm (drums) on the other. Both outputs are mixed already on mine. Actually, when you do call fmpak and go into the info menu, it shows a diagram, and it depicts a wired connection of msx sound out into the input of the cartridge on one socket, and the other one is for sound output... is that how you are supposed to connect it?

Anyway, I wanted separate outputs for drums and melody, and ended up building my own.

By st1mpy

Paladin (709)

Аватар пользователя st1mpy

21-02-2021, 03:02

Around 1:19 in this video shows the diagram

Страница 3/3
1 | 2 |