[WTS] Pac and "Game Master 2" in one cartridge.

Door Popolon_fr

Expert (72)

afbeelding van Popolon_fr

05-12-2022, 01:18

To preserve the original cartridge, I designed this clone of the Pana Amusement Cartridge and Game Master 2 which is used to save Panasoft or Konami game data. It contains a Sram and a Cr2032 battery to store the data as well as the GM2 Rom image file which must be loaded with the dedicated software. Then it is used like a classic cartridge.

For more details, use the contact address. here a preview of the cartridge with a subject of stickers.

Aangemeld of registreer om reacties te plaatsen

Van Retrofan

Paragon (1338)

afbeelding van Retrofan

05-12-2022, 16:17

Great, well done! Looks nice!
How much does it cost?
And can we replace the CR2032 battery very easy in the future if needed?

Van Popolon_fr

Expert (72)

afbeelding van Popolon_fr

07-12-2022, 18:41

You can consult it here. Yes, the battery can be easily changed once it is worn out ._, .

Van roadfighter

Champion (451)

afbeelding van roadfighter

09-12-2022, 14:01

@Popolon_fr I send you a mail concerning the gamesmaster clone.

Van roadfighter

Champion (451)

afbeelding van roadfighter

14-12-2022, 12:30

@popolon_fr maybe you could share your manual so the people get a understanding what it al can do and what cartridges it works with.

Van gdx

Enlighted (5996)

afbeelding van gdx

30-12-2022, 12:17

The manual is still not available?

Van Popolon_fr

Expert (72)

afbeelding van Popolon_fr

30-12-2022, 23:34

Here or there. B-)

Van Sylver78

Resident (36)

afbeelding van Sylver78

01-01-2023, 20:29

Salut Popolon_fr !
Is it possible to replace the sram with a Fram to remove the need of a cr2032 ?

Van gdx

Enlighted (5996)

afbeelding van gdx

04-01-2023, 10:08

I think SRAM use reduces the price. According the documentation, only one SRAM chip is used for the GM2 and PAC at same time and it even alows to expand the memory of both and update software in the future. Fram chips are expensive and only have 8 kB, so two FRAMs are required to make this kind of 2in1 cartridge and no software update possible.

Van Popolon_fr

Expert (72)

afbeelding van Popolon_fr

05-01-2023, 00:02

There is indeed the choice to use Sram rather than a Fram for the reason of the cost and the quantity of memory, but not only, because the PCB used was not only designed to realize this cartridge. Subsequently, I will have the opportunity to present something else based on the same device.