VroBIT team demonstrating at RetroMadrid

Van shaiwa

Champion (385)

28-04-2017, 15:26

This sounds almost like an instant buy, can't wait to see more.
Really like to see this hardware in action.

Van -Neo-

Champion (396)

28-04-2017, 16:36

Looking at the processor it seems this will be software emulation based. Wonder why they didn't choose to use a FPGA.

Van Hans41

Expert (71)

28-04-2017, 17:23

No floppy ?

Van JohnHassink

Ambassador (5665)

28-04-2017, 17:29

Oh yeah, and no cassette port either?

Van djh1697

Paragon (1696)

29-04-2017, 00:11

Hans41 wrote:

No floppy ?

Why do you need a floppy? There is an SD card, most software is now available in DSK format, which i guess will work on this new machine?

Van djh1697

Paragon (1696)

29-04-2017, 00:12

JohnHassink wrote:

Oh yeah, and no cassette port either?

See my previous comment! A TurboR has no cassette port either?

Van syn

Prophet (2114)

29-04-2017, 01:41

Arm cortex A53 are 1.2 Ghz ( and jack connectors are 3.5mm)

Van gdx

Enlighted (6102)

29-04-2017, 02:30

Very impressive project! Is MSX compatibility obtained by software? How long does VromBIT take to start up?

Van Hans41

Expert (71)

29-04-2017, 02:33

@ djh1697:

the wink after my remark apparently did not make it clear to you that it was meant as a joke ?

John got it.

Van journey

Hero (574)

29-04-2017, 08:13

Hans41 wrote:

No floppy ?

Maybe....you can connect a floppy through a USB connection?...

Van djh1697

Paragon (1696)

29-04-2017, 13:41

looking forward to seeing some youtube videos with the machine

Van syn

Prophet (2114)

29-04-2017, 14:20

I have been following this project for a while now. While I am not totally convinced yet, I think it is very interesting. Obviously it is (software) emulation because of the ARM processor used. On the personal blog of the creator (http://albertodehoyonebot.blogspot.nl/) there are some videos and (in spanish) various status updates.

I am not entirely sure but it looks like they /he used a Raspberry Pi 3 (which also has an ARM Cortex A53) and the old Gamereaders for prototyping, and written the software (emulation and some turbo basic thing) around that setup.

The creator actually made a few forum posts here (including concept arts of the case) about this project in the past but at first it was called "MSX 3" and after a while renamed to "MSX-VR" before it became VRoBIT. But unfortunately I can't find the posts/topics.

Van ARTRAG

Enlighted (6930)

29-04-2017, 15:27

So the plus w.r.t. Openmsx is reading the original cartridges, is it?

Van syn

Prophet (2114)

29-04-2017, 21:36

MAYBE faster boot time compared to full OS + emulator, although this is just guessing since I haven't seen the real thing in action + more of an overal msx/homecomputer feel (although feelings are always subjective).

Van ARTRAG

Enlighted (6930)

29-04-2017, 22:35

But it will look like a box with cart slots if I correctly understand...

Van tfh

Prophet (3314)

29-04-2017, 23:41

ARTRAG wrote:

But it will look like a box with cart slots if I correctly understand...

That's correct. It will be smaller then pictured above though. But indeed: It will be a box with cartridge slots & connectors. You'll need to add your own keyboard.

Van giuseve

Paladin (759)

30-04-2017, 17:19

I saw so many prototype of this vrobit on the blog.
The blog end the e-commerce website are all in spanish too.
Somewere I saw a rectangular black box and no other.
Somewhere a complete PC with keyboard
So
Will it be real ? If yes it could be mine but let we know something more !

Bye

Van Jury MSX

Expert (99)

30-04-2017, 22:19

Hello,
The computer showed in the Vrobit main page web not is the final model.
Following the Vrobit blog (English edition) you can view the last version of the project, only the UCP without keyboard.
https://vrobit.com/en/blog/next-meeting-retromadrid-n10
It is true that the web is a bit confused because the new and the old information are mixed in different places.
Here, in Spain, we are waiting for the end of this project with illusion and everything suggests that at the end of the current year, we would get one Vrobit in our home.

Van inyigo

Champion (355)

01-05-2017, 11:15

https://www.youtube.com/watch?v=UcmW5guhiB8

Van KdL

Paragon (1450)

01-05-2017, 15:07

I prefer the prototype to HC4000. The classic MSX look is more exciting!

Van syn

Prophet (2114)

01-05-2017, 15:34

interesting vrobit game https://www.youtube.com/watch?v=J-HWQNtONwY

Does this run on normal msx with extentions like gfx9k for example?

Van inyigo

Champion (355)

01-05-2017, 15:40

syn wrote:

interesting vrobit game https://www.youtube.com/watch?v=J-HWQNtONwY

Does this run on normal msx with extentions like gfx9k for example?

Operation Pig game doesn't work on normal MSX. It'll be exclusively for VRoBIT computer

Van Mozumiyasuro

Supporter (15)

02-05-2017, 07:46

This must be an exciting news to some people in Japan (at least for me for sure!) - so I added a translation

Van Louthrax

Prophet (2436)

02-05-2017, 12:28

So are we sure emulation is software based here (no FPGAs)?

Van inyigo

Champion (355)

02-05-2017, 22:49

Louthrax wrote:

So are we sure emulation is software based here (no FPGAs)?

Yes, we're sure. According to VRoBIT designers the emulation in the VRoBIT project is more than a traditional software emulation because you can connect real MSX hardware.

The emulation that you can watch in the VRoBIT is called by the designers as virtualitation.

You can feel a real MSX computer inside of VRoBIT.

Van inyigo

Champion (355)

02-05-2017, 22:53

Here are some photographs taken in RetroMadrid

Van inyigo

Champion (355)

02-05-2017, 22:57

Hans41 wrote:

No floppy ?

VRoBIT doesn't have a floppy disk but you can connect an USB disk unit.

Van Manuel

Ascended (19298)

02-05-2017, 23:48

Which software is it running?
Does it support original disks with copy protections? (I guess not.. What else can it NOT do or is NOT compatible?)
Does the cartridge support work like Game Reader and MSX PLAYer?
Does it support sound IN of the cartridge slot? 12V?

Van Louthrax

Prophet (2436)

03-05-2017, 00:01

Continuing Manuel's questions:
- Can a slot expander be plugged in the cartridge slots (and of course does it work)?
- Same question for MFRSCC+SD.

Van nerlaska

Master (166)

03-05-2017, 06:46

Hello! And excuse my non-presence in this and other conversations. I am quite busy on the project and I do not have much time to attend conversations in forums. In fact I prefer that other people do not me, so that others who value the project and everything is more objective. Anyway, there are still many things to explain as some of the issues that you raise here and that I try to clarify first hand. I take this opportunity to apologize for the confusing information that exists about the project and that I hope to be able to solve little by little with more content on the VRoBIT website. Thanks for your patience. Ok, about the questions:
- WHICH SOFTWARE IS RUNNING?
It is a kind of retro operating system. It has a BASIC, a DOS, a windows environment, tools to create music, graphics, internet, etc. It is integrated with a native object-oriented language such as BASIC in MSX, as such a thing for VRoBIT. And in general, everything necessary to work with MSX machines.
- ORIGINAL DISK WITH COPY PROTECTIONS?
I still need to control low level Floppy USB driver to do that. At the moment, Floppy is mounted as a normal filesystem.
- CARTRIDGE SUPPORT
It is a real cartridge support. You have SOUND IN, you have -12V, 12V and all the signals as a real MSX. You can put a cartrige with a new "mapper" invented by you and the VRoBIT will run it.
- CAN A SLOT EXPANDER BE PLUGGED IN THE CARTRIDGE SLOTS
Yes. Because the access to the carts like the DB9 ports it is real.
ABOUT MFRSCC+SD
Yes. This piece of hardware it works although we need to fix some CLK timing questions for solving bugs in the SD access.

Thank you for your intereset in the project and I hope to be able to continue to expand and improve the information regarding VRoBIT.

Van inyigo

Champion (355)

03-05-2017, 07:46

I would recommend to visit the VRoBIT Youtube's channel where you can watch demonstrations with real hardware and virtualized hardware. There are two channels:

VRoBIT Computer: http://www.youtube.com/channel/UCaApWUNcQ1ga8wq4TdHFOJQ

VRoBIT: http://www.youtube.com/channel/UCAlt6N0d3geUDmhCfNR08JQ

I would extremely recommend the video where you can see the game "Codenamed: Intruder" virtualizating the GFX9000 video cartridge.

https://www.youtube.com/watch?v=ELEEaKpJT_k&t=22s

In other videos you can watch the real MegaFlashROM (MFRSCC+SD) connected to VRoBIT. The VRoBIT you can see in this video is a previous prototipe ;)

https://www.youtube.com/watch?v=Jboz94QfY0Y

Van N.I

Master (175)

03-05-2017, 09:14

Is VRoBIT-BASIC an extension of MSX-BASIC? The thick book makes me imagine various things.

Van inyigo

Champion (355)

03-05-2017, 09:44

Louthrax wrote:

Continuing Manuel's questions:
- Can a slot expander be plugged in the cartridge slots (and of course does it work)?
- Same question for MFRSCC+SD.

You can read the post in the VRoBIT's Blog: VRoBIT testing the MEGAFLASHROMSCC++ SD

Van nerlaska

Master (166)

03-05-2017, 10:04

Is VRoBIT-BASIC an extension of MSX-BASIC?
VRoBIT-BASIC is a full rewritten BASIC interpreter. It is compatible with all the MSX-BASIC (well, it wants to do it, but this is a complex task and we need to solve bugs and problems but mainly it is working pretty well)
This BASIC has an inline text editor (_EDIT/CALL EDIT) with some tools for helping in the programming.
And we would want to include BASIC extensions too like GFX9000 and other ones.
So answering your question: No, it's not a MSXBASIC extension.

Van Manuel

Ascended (19298)

03-05-2017, 10:08

Thanks... but I'd like to understand the way the hardware (slot connector for instance) is interacting with the software. As you say the MSX functions (including video, right?) is completely working in software. It means you have an emulation of these chips running in software, right? Is that written from scratch or reusing existing emulation?
Can you tell a bit more about that?

Van nerlaska

Master (166)

03-05-2017, 11:11

Hi Manuel
Yes, the base of all this project is the emulation that mix with the hardware access in real time.
I am working with emulation since many years ago and a big part of my code is from scratch and another one is copy/paste and modifyied (optimizations/refactorization) but of course, I have used knowledge from known emulators like: BlueMSX, OpenMSX, FMSX, Mame and others furthermore the knowledge obtained from Books and from my original MSX computers.
The great MSX community share a lot of information about many things: hardware, software, devices, etc. and this make possible to create this magic.

Van ren

Paragon (1932)

03-05-2017, 11:22

inyigo wrote:

Louthrax wrote:

So are we sure emulation is software based here (no FPGAs)?

Yes, we're sure. According to VRoBIT designers the emulation in the VRoBIT project is more than a traditional software emulation because you can connect real MSX hardware.

The emulation that you can watch in the VRoBIT is called by the designers as virtualitation.

You can feel a real MSX computer inside of VRoBIT.

One well known deficiency of sw emulators is the input lag (delay) it imposes, which has an impact on gaming experience, esp. noticeable in games that require fast reactions / tight controlling like shoot 'em ups. Does the VRoBIT do a better job here, or will you still be able to tell the difference with real hw?

Van nerlaska

Master (166)

03-05-2017, 11:39

Hi ren,
I am not expert about this questions. As a normal player my feeling experience playing some games in a original MSX and in the VRoBIT are the same. But I am very bad player. I only can say that accurate timings in emulation are pretty good and in the case of VRoBIT we don't have any DRIVER that can create lag when we are reading from DB9 ports. When the CPU reads from port 0xA2 is reading directly the values of the DB9 port (totally hardware and compatible with MSX standard). But I repeat, I am not expert in that. I would want to test some conflictive game with a hardcore gamer to see if really the game experience is different than in a original MSX. Please, Would you be so kind to give me some game titles? Thank you.

Van hamlet

Scribe (4105)

03-05-2017, 12:49

My favourite game for testing emulators is Space Manbow. You will notice if there is a input delay.
It´s a quite nice project. Altough I do prefer the original hardware, I would buy a VROBIT. First time you have all the connections from a real MSX paired with mordern specs. I love it!

Van ren

Paragon (1932)

03-05-2017, 16:00

@nerlaska Hard to give a good suggestion myself, as I'm only using emulation, and no real hw for a while now..
Hamlet suggests Space Manbow (though I never had the impression it felt noticeable less direct on emulation myself..)
I had the impression earlier that Shmup! even felt different between open- & blueMSX, so perhaps that's a good one to check as well? Gradius 2 perhaps?
Anyone else who can point to a good test case?

-edit
Perhaps you know about Shmupmame? It reduces input lag noticeably. From the about page:

Quote:

[...] it turns out that mame emulates a frame/sprite buffer for most arcade hardware. What I found out is that this buffer can “safely” be removed on most hardware with very little consequences.

Van nerlaska

Master (166)

03-05-2017, 17:15

Ok .. in the next RU of Barcelona I will invite the SHMUP and other MSX games developer (Imanok) to play his games in the VRoBIT and we will see what is his opinion.
I have played all the Nemesis saga,Salamander and Space Manbow and I can't detect nothing. I have completed all this games in original MSXs and I can't feel nothing special or different, but I'd prefer to listen the same words from real game experts.
We will see. Meanwhile, I will take note about all the games commented here. Thank you!

Van ren

Paragon (1932)

03-05-2017, 17:36

Sounds good to me, great to see you're taking this seriously!

Van syn

Prophet (2114)

04-05-2017, 17:04

According to various sources most people don't notice around 32 milliseconds (2 frames if the screen runs at 60hz) or less input lag. So imho you can't test using test subjects/players to see if the "feel" lag. They will probably just not notice it.

Input lag or "emulation lag" is not only how fast a joystick/keyboard is being polled/read, there are other factors. For example how long does it take for a z80 instruction to be translated to arm instruction and then executed. Or the time it takes between your MSX game/program giving the command to display something on screen, to it being actually displayed. All this is probably not a lot, but it adds up.

@ren most of the input lag you have in emulators is also partly because of the operating system (windows/linux) and iirc usb protocol itself also has some input lag. And you need to add the lag that comes with TFT/LCD monitor usages (between 10~30 ms on average) when you compare to the old real thing that used a CRT.

@nerlaska: I am not an expert, but your VRoBIT code (the msx emulation), does it run directly on the ARM Cortex or is it running on linux or another OS?

If it is "directly", and your entire code (the emulation "layer") runs within one frame (with enough time for the msx code/program/game to run before next frame) at 60hz, I think there won't be enough input lag to affect gameplay.

Van nerlaska

Master (166)

04-05-2017, 05:50

Hi syn,
Thank you for your clarification. About the code, yes, my code is running directly on the ARM and all is processed by frame so, in theory, 50/60 fps are 50/60 real fps. I hope it will be enough for the most demanding people

Van sd_snatcher

Prophet (3645)

04-05-2017, 14:05

There's a very simple way to check if the machine has lag or not: connect it to a CRT TV, and test it with the following devices:

- Sanyo MLP-001 Light Pen interface
- Light-gun: run the latest version of JoyTest and some games like Air Hockey and Duck Hunt.

Van PingPong

Prophet (4093)

09-05-2017, 19:02

Hi, can you describe details on how you emulate the various vdp found in msx?
What kind of video hw is really under the cover? It is a fpga implementation or a vga like chipset?
When the machine first does boot you are interacting with some kind of command line interface from which you call the emulator. What others things you can launch from the cli?
If one want to make a sw for the new hw how can interact with hw? Are there sdk?
Thx in advan ce

Van nerlaska

Master (166)

11-05-2017, 06:50

>> How you emulate the various vdp found?
Well, you can run several kind of MSX machines. You can configure all them. You have all the VDP implementations and another extra VDP9978 (invented by me) that uses compatibility with VDP9958 and gives extra modes and features. You can run cartridges auto or manual. In auto mode a database is used to detect the better machine option, if database entry is not present, an autodection algorithm is applied.
>> What kind of video hw is really under the cover?
In the model HC4000 a Broadcom VideoCore IV
>> When the machine boots...
You can choose what to do in the boot. You can say: I want detect cartridges and boot them or you can say, no, I want to enter directly to the VRoBIT-DOS. In this command line client you can do a lot of things. Play multimedia files, program, go to BASIC, etc.
>> Programming
You have a native script language (object oriented) to program by default. You have a set of library objects to work with all the features of the machine. There are programming tools to convert this high level script language to ASM (Z80/R800 for example), ASM compiler and linker for working with MegaROMs automatically. There is a new Z80/R800 extended mode with a new instructions to access to the new features of this machine too. And you have the BASIC that is MSX compatible and you can access to the new features with new _CALL sentences. Many choices to do new things or things compatible with MSX.

I hope to give meaningful answers. Thank you for your interest.

Van journey

Hero (574)

11-05-2017, 09:01

instant buy for me
Can't wait!

Van ren

Paragon (1932)

11-05-2017, 09:25

Is the design we see here on the pics final?

Van nerlaska

Master (166)

11-05-2017, 15:07

Soon we will publish HC4000 item-sheet in the VRoBIT web. It is the model without keyboard. You can see it in the pictures published by Inyigo in this same forum entry.
HC5000 is like the HC4000 but with some extras (better CPU, RAM, etc.). We are studying this extras and extra price cost.
HC4001/HC5001 will be the computers with keyboard integrated. With the aspect of the computer shown in the main page of VRoBIT site but surely in black color and with some modifications in the design.
We want to give several options/prices to the people. It is more work for us but we want all the people can be happy with a VRoBIT.

Van valkyre

Hero (646)

11-05-2017, 15:17

I will be wanting a hc/5001 when it's ready.

Van ren

Paragon (1932)

12-05-2017, 13:14

Alright. I'm not really fond of the design myself, no offense (just my opinion), but looks too much like a big black (shoo) box to me and the white is too much in contrast to the black (I'd go for something more subtle myself - perhaps have a look at an anthracite hue, perhaps even for the box itself?) Furthermore I'm not sure about the position of those 4 cart slots..

The ideal box I picture myself is like 2-3x the Mac mini stacked or something, with 2 slots on top and 2 on the right side. Or perhaps even something like one on the top, right and back each (so 3 slots in total then (any particular reason you chose 4?))

But yeah, just picturing of course, you guys are actually building something

I do like the idea of separate kbd & box, gives some flexibility, but then, like I described above, I prefer another form factor - more like a cube or small tower.

Will the cart slots have (sprung) dust covers/lids btw?

Van ren

Paragon (1932)

12-05-2017, 14:34

*shooe

Van nerlaska

Master (166)

12-05-2017, 15:16

Yes, I am agree with you on that. The problem always it to design things "cheap". It is more easy (at least for us) and cheap to build all over a single PCB and not depend of more things. Do something "pretty" is expensive. As you said, we want to do something that works as an initial step. The chance is that. Make something compatible MSX as a real MSX with a hardware/software working. Later we will worry about the esthetic/details.
Thank you for your feedback!

Van journey

Hero (574)

12-05-2017, 15:47

For the model HC5001, I hope in something like this...
Especially with regard to the cursor keys

Van ray2day

Paladin (729)

25-05-2017, 09:36

wow

Van eimaster

Champion (282)

28-05-2017, 10:27

Does it include Al-Alamiah Sakhr arabic support in order to run Al-Alamiah Arabic softwares like the Holy Quran and other softwares?!

Van karloch

Prophet (2159)

29-05-2017, 17:12

I really think this is the nearest we have ever been of a true MSX 3.... or 7

Shut up and take my money!

Van Manuel

Ascended (19298)

24-08-2017, 11:30

nerlaska wrote:

Hi Manuel
Yes, the base of all this project is the emulation that mix with the hardware access in real time.
I am working with emulation since many years ago and a big part of my code is from scratch and another one is copy/paste and modifyied (optimizations/refactorization) but of course, I have used knowledge from known emulators like: BlueMSX, OpenMSX, FMSX, Mame and others furthermore the knowledge obtained from Books and from my original MSX computers.
The great MSX community share a lot of information about many things: hardware, software, devices, etc. and this make possible to create this magic.

What is the license of the emulation software? Are you planning to open source it, if not already?
I hope that the openMSX project can also benefit from your knowledge.

Van inyigo

Champion (355)

09-09-2017, 07:55

Here is a video from VRoBIT's Youtube Channel. In this video we can watch the HC3000 that is a prototype of a new MSX, where version 3.0 of the incredible Symbos operating system for MSX is running. They do it using a TurboR machine and by the way, they show the use of the config command to switch between HDMI (digital) or TV (analog) screens.

https://youtu.be/CSdhPkjon44

Van inyigo

Champion (355)

09-09-2017, 07:48

And here is the lastest video published by VRoBIT's team where shows how the VRoBIT computer allows you to upload files in the recent TSX format based on the Spectrum TZX (CDT in Amstrad). As soon as they have the new hardware ready, the idea is to show how it is also loaded from a real cassette since the TSX load system is based on the simulation of the input signal as it does a real device.

If you like the project and want to support its cause, we thank you to go through https://vrobit.com and leave your record. Thank you!

https://youtu.be/JzKHdmIwUj8

Van journey

Hero (574)

14-11-2017, 15:21

Web site down?....

Van spl

Paragon (1470)

15-11-2017, 15:26

journey wrote:

Web site down?....

From the main member: http://albertodehoyonebot.blogspot.com.es/2017/11/stranger-t...

Quote:

To all those who are looking for answers, please, in a few days we will comment on the project. Sorry for the inconvenience and thanks for your infinite patience.

Van Vampier

Prophet (2409)