Sony HB-F1XDJ RGB Pinout

Pagina 1/4
| 2 | 3 | 4

Door Opethian

Master (147)

afbeelding van Opethian

11-02-2014, 21:06

Does anyone have the manual to this model for the RGB DIN pinout? I have a SCART cable that doesn't display properly and I want to confirm the DIN pinout.

Aangemeld of registreer om reacties te plaatsen

Van Opethian

Master (147)

afbeelding van Opethian

11-02-2014, 21:07

RGB connector (Japanese models)
(Giovanni R. Nunes)

DIN 8 pins female

1 GND
2 AUDIO
3 NC
4 C SYNC
5 +5V
6 R
7 G
8 B

7 6
3 8 1
5 4
2

this is the diagram I followed but it doesn't seem to work correctly.

Van jltursan

Prophet (2556)

afbeelding van jltursan

11-02-2014, 23:01

It's mostly correct.

Check RGB - SCART cable section in the MSX hardware FAQ for a complete description.

Van Opethian

Master (147)

afbeelding van Opethian

12-02-2014, 16:37

oh pins 3 and 5 are totally different looks like I'll need em

Van ApolloBoy

Expert (96)

afbeelding van ApolloBoy

15-02-2014, 11:06

I've also got an HB-F1XDJ and I'm pretty sure my SCART cable doesn't have pins 3 or 5 wired up. All you really need are the RGB pins, ground, audio and composite sync.

Van jltursan

Prophet (2556)

afbeelding van jltursan

15-02-2014, 18:26

That usually doesn't work if you use a TV set, only with RGB monitors.

Van Marq

Champion (387)

afbeelding van Marq

15-02-2014, 19:21

You need to connect the 5V line to the SCART blanking pin through a resistor of around 100..200 Ohm. That's needed for most TV sets.

Van ApolloBoy

Expert (96)

afbeelding van ApolloBoy

16-02-2014, 01:37

Marq wrote:

You need to connect the 5V line to the SCART blanking pin through a resistor of around 100..200 Ohm. That's needed for most TV sets.

Isn't that just for autoswitching though? Plus, I know the OP (he actually sold me my copy of Nemesis 3!) and I believe he uses an RGB monitor so the autoswitching stuff isn't necessary.

Van Marq

Champion (387)

afbeelding van Marq

16-02-2014, 09:15

On most TV sets I've seen there's no way to force the RGB and they tend to default to composite. It won't hurt with RGB monitors, either, if you use the same tube for other machines as well.

Van Opethian

Master (147)

afbeelding van Opethian

21-02-2014, 22:23

I intend to use this on a sony PVM-14L5 with audio broken out of course.

Van bakoulis

Master (166)

afbeelding van bakoulis

22-02-2014, 00:04

I have also the Sony HB-F1XDJ and a good friend build a cable for me, from the http://www.faq.msxnet.org/connector.html
The cable works perfect on my Samsung 32' LCD TV. When turn on my MSX, the TV autoswitching to MSX screen.

SONY HB700 RGB plug: (seen from cable side)

7 6

3 8 1

5 4
2

SCART connector: (seen from cable side)

+---------------------------------------------+
\ 20 18 16 14 12 10 8 6 4 2 |
\ |
| 19 17 15 13 11 9 7 5 3 1 |
+-------------------------------------------+

How to connect:

RGB: Description: SCART:
1 audio ground 4 (and 5, 9, 13, 14, 18 to be sure)
2 audio right 2 (and 6 (mono))
3 status CVBS 8
4 CVBS 20
5 status RGB 16
6 red 15
7 green 11
8 blue 7

Pagina 1/4
| 2 | 3 | 4