translation languages

holandes

talking about languages...
(for once I WILL have a go for it, since you keep on making the same mistake in every darn post) fly:

In Enlish, in the "me" sentence you use "am" and in other cases use "are"..
e.g. "I am doing...", "you/they are doing..." etc.

so to translate YOUR initial post a bit:
"I am doing/working on the final details for the next and LAST DEMO.
As now, the mnbios supports multiple languages, I need somebody to translate some text from English to : DUTCH, PORTUGUEZE, ITALIAN, FRENCH."

get it?
Next is your NMBIOS text strings to check for Enlish.. well some one else should cuz mine sucks too.
here are a few:

Undefined error. -> in fact, this error IS defined... better: "Unidentified error"
The mblock not exist. -> DOES not exist
The mblock already existed. -> exists
Mblocks tags corrputs. -> corrupt
Mblock ID invalid.
Syntaxis error. -> Syntax (we don't pay any taxis on syntaxes, do we?)
Lack parameter. -> Missing parameter?
Undefined notation. -> again, unidentified
Unknown question. -> unknown command ??

Insufficient free space in ATD. -> Unsifficien AND free ?? leave "free"out of it...
Not initialized Driver. -> Driver not initialized
The driver is not of reading. ->??
The driver is not of writing. -> Driver is read-only (?)

At least a device didn't enter in TRUD. -> At least ONE device...
There is not any residence in the segment PRG. -> hmm, explain. Maybe this could be simpler like "Out of memory"?

The suitable page of the file doesn't exist. -> what?

Error of or when processing (it is not necessarily error of the ADM). -> what?

Number of page absolute invalid. -> what?

Comunication error. -> funny! (in case of this thread..hehe)
The controller doesn't respond. -> Didn't respond (?)
The device doesn't respond. -> idem

Track number doesn’t exist. -> just "Track doen'st exist" should do it
Sector number doesn't exist. -> idem
Head number doesn't exist. -> idem
Driver doesn't respond. -> didn't ??
Full directory. -> directory full

There was even FCB to close when the disk was changed. -> what??
There were data in the cache to write at the moment of the change of the disk. -> there WAS data in....

Too busy device to be true. -> huh?

The current matrix is not of reading. -> not FOR reading..
Incorrect definition of a window. -> Incorrect Window definition
There is not more place in DATASYS for another window. -> is NO more...
Buffer of the keyboard was disabled. -> KBbuffer was/is dis.
A bigger event took place. -> sure there was
Buffer of the keyboard is empty. -> KBfug is empty
The buffer of the PSG is full. -> PSGbuf is full

...
and now for the subtitles...

Errors list with corrections...

Unidentified error.
The mblock is too big to fit in DATAMEMO.
The mblock does not exist.
The mblock already exists.
Mblocks tags corrupt.
Mblock ID invalid.
Syntax error.
Filename invalid.
Missing parameter.
File type unknown.
Unidentified notation.
Path invalid.
Incorrect parameter.
Unknown question.
Unit letter invalid.

Full ATD.
Empty ATD.
Unsifficien free space in ATD. <--- "the translator pro translates as "insufficient"? sure about it?
Scarce data in ATD.
Overflow.
Subflow.
Calculation error.
Overflow.
Invalid driver.
Driver not initialized.
Unsupported command.
The driver is write-only.
The driver is read-only.
The device doesn't exist.
At least one device didn't enter in TRUD.
Chart TRUD empty.
There is not any residence in the segment PRG.
There is not any residence in the segment DAT.
The suitable page of the file doesn't exist.
Wrong EXEC header.
Required unit of the ADM is not available.
Index is outside of the DAT segment.
Error of or when processing (it is not necessarily error of the ADM).
Number of page absolute invalid.
Overflow of the segment DAT.
Index is outside of the segment PRG.
FAT error.
FCB already in use.
Label not found.

Comunication error.
The controller didn't respond.
The device didn't respond.
Device error.
Out of paper.
Not ready or offline.
Disk error.
Track not found.
Sector not found.
Track doen'st exist.
Sector doen'st exist.
Head doen'st exist.
Write protected.
Port or channel disabled.
Petition or crossed access.
Driver didn't respond.
Error in the BOOT sector.
FAT corrupt.
Error in the partition sector.
Directory full.
Not enought free memory.
The subdirectory is not empty.
The subdirectory already existed.
Path not found.
Number of DIRIN exceeds the end of the directory.
DIRIN empty.
File not found.
File already exist.
File corrupt.
Refused access.
File already open.
Out of DATA.
FCB inexistent.
Out of free FCB.
FCB is not assigned.
There was at least one FCB open when the disk was changed.
There was data in the cache to write at the moment of the change of the disk.
Link number nonexistent FAT.
Too busy device to be true.
Internal error for FNEXT.
Number of DSPR nonexistent.
There is not chart DSPR initialized.
There is not chart DCHR initialized.
Number of DCHR nonexistent.
The current matrix is not for reading.
Incorrect window definition.
There is no more place in DATASYS for another window.
The specified window doesn't exist.
KB Buffer is disable.
A bigger event took place.
Buffer of the keyboard is empty.
That TIMER doesn't exist.
PSG buffer is full.

fly, "Unsifficien " was a typo...

and what's the use of a driver that is write-only? does that mean it can't be used (aka be read) ??
So I create a driver but next I can't use it 'coz I can't read it.. kinda strange uh?!

Undefined error
So you define an error which states "undefined error".. ain't that a paradox?

Errors list with NEW corrections...

Undefined error.
The mblock is too big to fit in DATAMEMO.
The mblock does not exist.
The mblock already exists.
Mblocks tags corrupt.
Mblock ID invalid.
Syntax error.
Filename invalid.
Missing parameter.
File type unknown.
Unidentified notation.
Path invalid.
Incorrect parameter.
Unknown question.
Unit letter invalid.

Full ATD.
Empty ATD.
Insufficient free space in ATD.
Scarce data in ATD.
Overflow.
Subflow.
Calculation error.
Overflow.
Invalid driver.
Driver not initialized.
Unsupported command.
The driver is write-only.
The driver is read-only.
The device doesn't exist.
At least one device didn't enter in TRUD.
Chart TRUD empty.
There is not any residence in the segment PRG.
There is not any residence in the segment DAT.
The suitable page of the file doesn't exist.
Wrong EXEC header.
Required unit of the ADM is not available.
Index is outside of the DAT segment.
Error of or when processing (it is not necessarily error of the ADM).
Number of page absolute invalid.
Overflow of the segment DAT.
Index is outside of the segment PRG.
FAT error.
FCB already in use.
Label not found.

Comunication error.
The controller didn't respond.
The device didn't respond.
Device error.
Out of paper.
Not ready or offline.
Disk error.
Track not found.
Sector not found.
Track doen'st exist.
Sector doen'st exist.
Head doen'st exist.
Write protected.
Port or channel disabled.
Petition or crossed access.
Driver didn't respond.
Error in the BOOT sector.
FAT corrupt.
Error in the partition sector.
Directory full.
Not enought free memory.
The subdirectory is not empty.
The subdirectory already existed.
Path not found.
Number of DIRIN exceeds the end of the directory.
DIRIN empty.
File not found.
File already exist.
File corrupt.
Refused access.
File already open.
Out of DATA.
FCB inexistent.
Out of free FCB.
FCB is not assigned.
There was at least one FCB open when the disk was changed.
There was data in the cache to write at the moment of the change of the disk.
Link number nonexistent FAT.
Too busy device to be true.
Internal error for FNEXT.
Number of DSPR nonexistent.
There is not chart DSPR initialized.
There is not chart DCHR initialized.
Number of DCHR nonexistent.
The current matrix is not for reading.
Incorrect window definition.
There is no more place in DATASYS for another window.
The specified window doesn't exist.
KB Buffer is disable.
A bigger event took place.
Buffer of the keyboard is empty.
That TIMER doesn't exist.
PSG buffer is full.