Nextor 2.0 Alpha 2b

van konamiman op 01-09-2011, 17:09
Onderwerp: Software
Labels: Utilities
Talen:

Konamiman has published a new alpha version of Nextor, the MSX-DOS 2 compatible operating system. There are no new features on this version, but several bugs were fixed. The most important thing about this release, however, is that this is the first version that has been tested (altough only superficially) with real hardware: a Sunrise CF reader in a MSX Turbo-R.

Additionally, there is a new tool available at Konamiman's site: IDEFL128.COM. This is a modified version of IDEFLOAD.COM, the Sunrise IDE flash ROM loader, that allows flashing 128K ROM files (the original IDEFLOAD.COM tool allows flashing 64K files only). IDEFL128.COM has been developed by Jon De Schrijder and it is necessary in order to flash the Nextor kernel on a Sunrise IDE or CF reader device.

Relevant link: Konamiman's MSX page

Reacties (25)

Van edoz

Prophet (2297)

afbeelding van edoz

01-09-2011, 17:46

Tis is realy good new.. i'm gonne test it on real hardware Wink

Van konamiman

Paragon (1083)

afbeelding van konamiman

01-09-2011, 18:06

I need someone to test it on a hard disk (not CF card), plz!

Van edoz

Prophet (2297)

afbeelding van edoz

01-09-2011, 21:02

First results:

I tryed it on my MSX 8280 (7mhz, 2+)

1. I insered a new CF card (2GB) in my sunrise interface. (To be sure)
2. I used the flash program succesfully (Use INS to boot your system and create a disk with both nestor and dos 1 and dos 2 on it)
3. After a reboot i used _Fdisk to create a new partition (2GB fat16) and saved the partition table to the CF card. (This part i realy cool!!) without loading anything from disk Wink
4. After a reboot (again) i noticde that i saw there was 1 A disk for the fat16 partition there was no B: for some reason and the first floppy drive was C and D
5. I copyed the Dos and Nestor files in basic from c: to a: in this case.
6. Again i rebooted the system and nester dos was started succesfully.
7. If you do a DIR it takes a lot of time to calculated the free disk space (more then 5 seconds) this is not handy.
8. If i inserted my flash card (the one i used before flashing the new rom the the IDE interface) (contains multiple fat 12 and 1 fat16 partition it's not working anymore with the flashed version of nestor..

This was my first test.. i have to test a lot more .. next thing is to copy some programs and files to my MSX and look how compatible nestor dos is.
But first impression is cool !! very cool that you are making this software for MSX..

Van edoz

Prophet (2297)

afbeelding van edoz

01-09-2011, 21:19

( i created a topic for this)

Van sd_snatcher

Prophet (3326)

afbeelding van sd_snatcher

02-09-2011, 00:25

I never get tired of saying that this project rulez! Native FAT16 support, and no panic over LFNs? That's a dream-come-true!

Van edoz

Prophet (2297)

afbeelding van edoz

02-09-2011, 08:23

Me to! LOL!

Van NYYRIKKI

Enlighted (5587)

afbeelding van NYYRIKKI

02-09-2011, 14:37

7. If you do a DIR it takes a lot of time to calculated the free disk space (more then 5 seconds) this is not handy.
Try "reduced allocation information mode", this should fix your problem (Type: RALLOC A: ON)

Van Morg

Master (141)

afbeelding van Morg

02-09-2011, 23:12

I still wonder how did he get the source and if he's got a permit to modify it... BA-team

Van Poltergeist

Champion (276)

afbeelding van Poltergeist

03-09-2011, 00:27

@morg: Look here

Van Morg

Master (141)

afbeelding van Morg

03-09-2011, 16:47

@poltergeist Thanks! It's like a movie plot xD

Van Bastiaan

Champion (332)

afbeelding van Bastiaan

04-09-2011, 20:44

really cool! Excellent story behind it!

will you even try to implement some of the enhancements that where done in newer versions (up to msx-dos 2.44)?

Van Bastiaan

Champion (332)

afbeelding van Bastiaan

06-09-2011, 20:16

never mind my remark about dos 2.44, I see you recommend using it with TNI command 2.44...

any thoughts on how to use/load it into an SD/MMC interface?

Van Sd-Snatcher

Hero (582)

afbeelding van Sd-Snatcher

06-09-2011, 20:26

When driver is available.

Van Sky_hawk

Champion (267)

afbeelding van Sky_hawk

07-09-2011, 09:11

Hm interesting, I wonder if we could also incorporate this in the nowind interface.

Gr,

Jan

Van OeiOeiVogeltje

Paragon (1361)

afbeelding van OeiOeiVogeltje

15-04-2012, 22:58

So ,
how is this poject going on???
Id like to test it but i need to know if this is compatible with "normal" CF interfaces

with that i mean
can i put a nextor formatted CF in a Sunrise CF interface (as lave card)

Van edoz

Prophet (2297)

afbeelding van edoz

16-04-2012, 08:58

I would say, just try it Wink

Van OeiOeiVogeltje

Paragon (1361)

afbeelding van OeiOeiVogeltje

16-04-2012, 16:36

nah
too much fuss to make it all undone
and i have no other CF to try it with

Van Manuel

Ascended (16831)

afbeelding van Manuel

16-04-2012, 19:22

Buy more CF's!

Van OeiOeiVogeltje

Paragon (1361)

afbeelding van OeiOeiVogeltje

16-04-2012, 22:33

CF interfaces are hard to come by these days
and i would NEED another interface;one with "normal" bios and one with "Nextor" bios

Van edoz

Prophet (2297)

afbeelding van edoz

17-04-2012, 10:07

i don't get it. If your search the internet there are a lot of CF's! And last week i saw them also in the mediamarkt.
Also.. about the interface... just flash that thing! .. you can simply go back.. so.. i don't see the problem Wink
And during all those actions you have some FUN with your MSX Wink And the test results are also welcome Wink
Developers need guys to test their software Wink Because.. if you don't find a bug there is no new release needed Wink

Van OeiOeiVogeltje

Paragon (1361)

afbeelding van OeiOeiVogeltje

17-04-2012, 12:55

ehmm
if i have to check from compatibility between "normal " and "nextor" i would have to flash my "normal" CF interface,then prepare my CF card for use with Nextor,then reflash my CF interface to "normal" and then see if the Nextor prepared CF card still is readable/usable.
Too much fuss...

if a Nextor prepared CF card would work as a slave card with in a normal CF i would do it right away
i need to have compatibility with other MSX users who dont have nextor

Van edoz

Prophet (2297)

afbeelding van edoz

17-04-2012, 15:56

But it is just FAT16 ?

Van OeiOeiVogeltje

Paragon (1361)

afbeelding van OeiOeiVogeltje

17-04-2012, 21:24

thats why i want it to work as slave card in a normal interface

ehmmm
to make a long story short

Does the combination "normal" CF with one CF with fat12 partition + fat16 partition (fat16 driver loaded) and a nextor fat16 CF card work if placed in a "normal" CF interface?

Van edoz

Prophet (2297)

afbeelding van edoz

18-04-2012, 09:33

Normaly, you can boot from a FAT16 partition using Nextor. (nextor.sys must be on the root of the CF)
But, i would say.. always backup your software.. but this is something you have to do now also on a regulair base Wink

Van OeiOeiVogeltje

Paragon (1361)

afbeelding van OeiOeiVogeltje

16-11-2012, 16:55

ehm
since my problems with the Sunrise CF interface i have a spare flashchip that goes one it
i was wondering if it was possible to put that one int too and make a switch in the interface so i could switch it?
so no flashing but only flipping a switch?