ps/2 keyboard to msx

Par Shinobi

Expert (122)

Portrait de Shinobi

19-07-2020, 12:42

Hi..

Any solution to make ps2 keyboard work on msx??

!login ou Inscrivez-vous pour poster

Par Meits

Scribe (5937)

Portrait de Meits

19-07-2020, 13:22

Yes :)

Par caro

Champion (507)

Portrait de caro

19-07-2020, 17:04

Par conceitedjerk

Supporter (16)

Portrait de conceitedjerk

19-07-2020, 21:32

Meits wrote:

Yes :)

I second this recommendation. I bought one of Leonardo's PS/2 adapters earlier this year for my ailing HB-F1XD, it works great.

Par Danjovic

Master (145)

Portrait de Danjovic

01-08-2020, 01:49

Don't this keyboard adapter on a cartidge drive the bus at the same time that the PPI during 'in ($aa)' instruction ?

Par sdsnatcher73

Paragon (1083)

Portrait de sdsnatcher73

01-08-2020, 05:06

That is probably true but as long as you do not press a key on both the original keyboard AND the PS/2 that is not an issue. I suspect the signals are logical AND towards the bus so if internal would put 00000001 and external would put 00000010 the MSX would read 00000011 which would still be okay but give a different character then expected.

Par ducasp

Champion (347)

Portrait de ducasp

01-08-2020, 05:17

Keyboard input is pulled up, so it is normally vcc when keys are open, that means every time a key is pressed PPI will feed current to the cartridge adapter that will force a 0 on a line PPI is outputting 1,if it just drain enough current to have voltage level detected as logical 0 by z80 but still within the ppi limits, it should be fine, otherwise, it might cause issues to the PPI in the long run.

Par karloch

Prophet (2090)

Portrait de karloch

01-08-2020, 10:19

I have a Padial adapter based on Z8 microcontroller that works wonderfully well; however it won't work with Panasonic MSX2+ or TR machines.