MSX2 rom flash to start with 60Hz | MSX Resource Center (Page 2/7)

Par [D-Tail]

Ascended (8263)

12-10-2004, 18:31

Or Buy A Japanese MSX
Did I hear an echo here...?

Par Avkooi

Expert (101)

12-10-2004, 18:45

Hello,

Isn't the easiest (and cheapest) solution to just change the ROM (that is not soldered in an NMS 8250 anyway ;-) for a 60 Hz one? Or am I missing something here?

But thanks for the suggestions of course!

Par Guillian

Prophet (3529)

12-10-2004, 18:45

You can use MegaFlashROM multiROM menu to swicth NTSC/PAL when booting. But bare in mind some games will change the Hz (i.e.: Solid Snake to 60Hz)

Par Sonic_aka_T

Enlighted (4130)

12-10-2004, 23:41

uhm, I think the guy just wants to know if there's anyone out there that can burn a ROM for him... Is there?

Par [D-Tail]

Ascended (8263)

13-10-2004, 12:58

Or put the 2 LD's and OUT's for him in the ROM source and then burn it.

Par meits

Scribe (6571)

13-10-2004, 13:35

Years ago one of the NDers was willing to burn me an eprom with the vdp(10)=0 thing in it, shich I could place in my musicmodule... The reason why I didn't do it, i forgot. Could have been quite nice though.
If someone 's willing to develop/program such an eprom for in a musicmodule, I'd be one of the first buyers.

Par Sonic_aka_T

Enlighted (4130)

13-10-2004, 14:59

Well, the main problem is finding someone willing and able to program the EPROM. Once you have that, the rest shouldn't be too hard anymore... Unless ofcourse the ROM is full... ^_^

Par [D-Tail]

Ascended (8263)

13-10-2004, 15:26

Whoa, just delete the escape-while-booting routine in the ROM and compile again. No-one should use those or just clear the whole EPROM, since the built in program is crap anyway

Par Sonic_aka_T

Enlighted (4130)

13-10-2004, 16:08

Uhm, I'm pretty sure Avkooi will want to 'upgrade' his BIOS, not use a music module in order for this to work...

Par [D-Tail]

Ascended (8263)

13-10-2004, 16:38

Then he could strip the cassette routines for the same reason