I have a MSX2+ Sanyo Wavy 70FD on this conditions:
1. Memory upgrade internally to 128k
2. Voltage operation of 220v (no extra transformer)
3. The FDD loads and format disk without trouble
3. ALL the keyboard is nice, CLEAN and tested
4. Both cartidgle Slots tested and OK
5. As it can be see on pictures from the bottom part of the computer the baterry cover is missed
As you know is a hard computer to find and you can take a look to the pictures to realize that it´s on a nice condition for the time that has. Everithing is clean and in working condition and it will be more than well packed to you. I wait for serious offers in this email adress:
dcorreaib at telefonica dot net
at= @
dot = .
The price for the shipping is most common for all european countries. And from SPAIN to most of Europe is around 41 euros with a base insurance of 180 euros.But if you find any other company with better rates I would sent it with it. Here are the picture links:
http://img135.imageshack.us/i/26012011135.jpg/
http://img812.imageshack.us/i/26012011136.jpg/
), but pause button is easy to add (have it on my own FD2). Try looking in Turbo-R schematic (or any other 2+ that uses T9769 engine chip), see how pause button is connected there, and connect a push button similarly in your Wavy FD2. Perhaps you need to add a resistor or something like that, but IIRC it's easy to find suitable solder point(s) on the Wavy FD2's mainboard (which I suspect to be the same as for Wavy FD). 
