looking for: Joy-pad(s)

Page 1/2
| 2

By Moniz

Champion (394)

Moniz's picture

07-04-2008, 02:12

Hello all!

I'm looking for joypads for my MSX.
I've been checking Ebay lately, but didn't seen them in a while.
Does someone has one left over ? or maybe 2 of the same ? Maybe we can come to an angreement !

thanx !Big smile

Login or register to post comments

By OeiOeiVogeltje

Paragon (1406)

OeiOeiVogeltje's picture

09-04-2008, 17:24

rklok had some a few weeks ago on ebay

try to contact him

By rklok

Champion (280)

rklok's picture

10-04-2008, 23:07

eBay

There are 2 Panasonics in there ...

bye

Rklok

{mod: please use the [ url=http... ]Short text[ /url ] BB code from now on...}

By Moniz

Champion (394)

Moniz's picture

11-04-2008, 16:58

Thanks!

I just placed a bid !

By Moniz

Champion (394)

Moniz's picture

09-12-2008, 20:33

Hmmm. it has been awhile.. I'm still looking for one!

Anyone has one hanging around that is working good and is willing to sell it to me Question

thanks!

By JGM

Master (132)

JGM's picture

09-12-2008, 21:50

I have recently bought a sega rhino pad. I've converted this one so it works as a 2 button joypad for msx. It only costs €5,99 and I can help you to make it suitable for msx.

By Moniz

Champion (394)

Moniz's picture

09-12-2008, 22:08

sounds good!
does it need any solding ? 'caus I'm not very good at it...oO

By JGM

Master (132)

JGM's picture

10-12-2008, 18:09

Yes, atleast that is the best way 2 do it.
But it is really simple.

You only have to cut 3 wires an solder 2.
If you open it you'll see 9 wires. they come from the connector 9pins and they are attached to the rhinopad.

You only have to cut the red,the gray and the black one.
then you solder the red wire (from the 9pin connector (stekker)) to the gray wire (attached to the rhinopad),
and you solder the gray wire (from the 9pin connector (stekker)) to the black wire (attached to the rhinopad).
That's all.
The red wire (attached to the rhinopad) and the black wire (from the 9pin connector (stekker)) stays unused.

This gamepad works really good on my msx.

If you still have questions, you can always mail me.
jgmschoofs@gmail.com

good luck:)

By Moniz

Champion (394)

Moniz's picture

15-12-2008, 00:22

You only have to cut the red,the gray and the black one.
then you solder the red wire (from the 9pin connector (stekker)) to the gray wire (attached to the rhinopad),
and you solder the gray wire (from the 9pin connector (stekker)) to the black wire (attached to the rhinopad).
That's all.
The red wire (attached to the rhinopad) and the black wire (from the 9pin connector (stekker)) stays unused.

Sound like i have to defuse a bomb ! LOL!

Since they are cheap I just have to give it a try I guess !

Thanx !

By dhau

Paragon (1570)

dhau's picture

15-12-2008, 02:37

I use SEGA Master System joypad on MSX. It works great and doesn't need any conversions. It also looks much better then any joypad, made specifically for MSX.

By JGM

Master (132)

JGM's picture

15-12-2008, 16:58

And, allready defused the bomb.TongueTongueTongue

Or did it explode!!!!!Cool

Page 1/2
| 2