Software problems with SVI-738

Page 1/2
| 2

By diabolus

Resident (54)

diabolus's picture

27-06-2003, 18:43

Why doesn't some msx1 games ,like Terramex, work on my SVI-738? Is there a compability problem with 9938? The games run correct on emulator configured to msx1.
At home.c2i.net/MMSost/MMSost.html there is also mention of Salamander and Nemesis 3 not working on 738.

Login or register to post comments

By anonymous

incognito ergo sum (116)

anonymous's picture

27-06-2003, 20:28

Probably because of memory configuration problems. English programmers (and rom cartridge crackers) didn't care too much for abiding by the MSX standard.

Try the following command before loading the game:
POKE -1,(NOT(PEEK(-1))AND240)*17/16

By diabolus

Resident (54)

diabolus's picture

28-06-2003, 14:36

Thanks!!

I've tried several other pokes with no result, but this one does the trick. I've only tried the poke with Terramex, let's hope it works with other non-working games too.

By MäSäXi

Paragon (1884)

MäSäXi's picture

23-08-2004, 16:45

I found this old topic..

Why doesn't some msx1 games ,like Terramex, work on my SVI-738? Is there a compability problem with 9938? The games run correct on emulator configured to msx1.
At home.c2i.net/MMSost/MMSost.html there is also mention of Salamander and Nemesis 3 not working on 738.

Checked that link too.. and I really wonder, because guy behind that link says Nemesis 3 works on ALL his msx-1s (including svi-728) except Spectravideo svi-738... I have two spectravideo 728s and none of them haven´t never ever run Nemesis 3...

is there any other msx-1 megarom carts which does not work on Seitenkakskasi (finnish... that is 728 to you) ? (and on 738 of course)

By diabolus

Resident (54)

diabolus's picture

13-09-2004, 23:57

Kyllä nuo Konamin modulit (Salamander & Nemesis 1,2,3) toimii mun kaikissa koneissa. SVI728, SVI738, NMS8255. Taitaa olla vikoja monissa svi:n tuotteissa?

In English:
Those cartridges (Salamander, & Nemesis 1,2,3) works just fine with my machines. SVI 728 & 738, and NMS8255, prolly there's some problems with a lot of Spectravideo products, maybe?

By NYYRIKKI

Enlighted (6033)

NYYRIKKI's picture

14-09-2004, 10:09

Muistelisin, että Nemesis 3 lähtee käyntiin, jos vaan kopioi ensimmäiset 16K ensin RAM:iin. Tämä johtuu vissiinkin siitä, että modaamattomassa SVI-738:ssa RAM on ensimmäisessä moduliportissa toisin, kuin muissa MSX1:ssä.

In English:
If I remember correctly, you can start Nemesis 3 by copying fist 16K to RAM first. I think, that this is caused by the fact, that in unmodifyed SVI-738 RAM is in slot 1 unlike in other MSX1 computers.

~NYYRIKKI

By Gorgane

Resident (62)

Gorgane's picture

28-09-2004, 20:21

Suomeksi: Toivoa sopii, että Nemesis 2 toimii minun 728 koneella. Spectravideon koneiden laatu on kyllä aika huono. Totesin oman 728 koneen avatessani, että masiinan koossapitävä voima on liima. Onkohan näissä jotain eri revisioneja, mitkä vaikuttaisivat toimivuuteen? Omassa koneessa on esim. kaksiosainen emolevy, jonka palat ovat parilla kaapelilla toisissaan kiinni ja komponenttien koossapitävä voima on jokapaikassa tulviva liima. Näppishän näissä on tunnetusti huono, tuntuu kuin yrittäisi pesusienellä kirjoittaa. Onneksi ei tarvitse näppäillä kuin kasetinlataus komentoja.

In English: I really hope that Nemesis 2 will work on my SV-728. The quality of Spectravideo machines is generally quite bad. I opened my own machine and noticed that the motherboard is composed of two separate boards linked with few cables and the thing that keeps everything together is glue. I wonder if there are some different revisions that affect compatibility? It's a well known fact that the keyboard on these things is bad, it feels like if you are trying to write with a sponge. Luckily i only need to write cassette loadin commands.

By NYYRIKKI

Enlighted (6033)

NYYRIKKI's picture

28-09-2004, 21:19

Kyllä 728:ssa Konamin pelit toimii. Nemesis 2:sta jää kyllä SCC äänet kuulematta, mutta siihen auttaa vastuksen vaihto piirilevyltä. SVI oli vähän kuin EuroShopper on nykyisin ruokakaupassa. Jos vaan jotenkin saa halvemmalla tehtyä, niin sitten tehdään niin. Konetta aukoessa kannattaa muuten varoa, ettei katkaise näppiskaapelia. Muistaakseni myös 728:ssa se on tehty käytännössä teipistä, jonka väliin on pistetty pussinsulkija rautalankaa. Tosin epäilen kyllä, että oikeat pussinsulkijat kestäisivät paremmin rasitusta. Smile

Translation:
Konami games works fine on 728 although SCC sounds can not be heard. This can be anyway fixed by changeing resistor from motherboard. SVI machines were made as sheap as possible. While opening the computer, try to avoid breaking the keyboard cable. If I'm correct, it is made from plastic tape and iron wire also in 728.

By Gorgane

Resident (62)

Gorgane's picture

28-09-2004, 21:51

Mistäs tuo vastus pitäisi vaihtaa ja minkälaiseen? Kuva/kuvat auttaisivat paljon. Sääli, että Spectravideo on Suomen yleisin MSX kone, laatu kun on tosiaan aika syvältä. No, maksoin omastani ja mukana tulleesta nauhurista ja peleistä 5e, joten aika hyvä kauppahan tuo oli. Olisin kyllä tosiaan kiitollinen, jos joku neuvoisi miten, mistä ja minlälaiseen tuo vastus pitäisi vaihtaa. Olen jo kerran koneen avannut, enkä onnistunut mitään rikkomaan. Smile

In English: Where should that transistor be changed and what kind of a transistor should be substituted? A picture/pictures would help a lot. It's a real pity that 728 is the most common MSX in Finland as the quality really sucks. Well, i only paid 5e for my machine and it included a cassette deck and a bunch of games so it was a pretty good deal. I would really appreciate it if somebody would tell me how, where and to a what kind of transistor that original shitty transistor should be swapped. I have opened the machine once already and managed not to break anything. Smile

By ccfg

Rookie (20)

ccfg's picture

28-09-2004, 22:21


Mistäs tuo vastus pitäisi vaihtaa ja minkälaiseen?

In English: Where should that transistor be changed and what kind of a transistor should be substituted?

You can find the instructions at Funet:
www.funet.fi/pub/msx/txt/hwdoityourself/svi728cart.txt

By Gorgane

Resident (62)

Gorgane's picture

28-09-2004, 22:34

Kiitos infosta, mutta tarvitsisin yhä edes jonkinlaisen kuvan. En edes tiedä että missä tuo äänipiiri sijaitsee.

In English:
Thanks for the info, but i would still need a picture of some kind. I don't even know where that soundchip is located at.

Page 1/2
| 2