CP/M programs in MSX1

By Guseco

Expert (68)

Guseco's picture

19-05-2011, 11:55

Hello all

Does anybody know if is possible to run CP/M programs in MSX1 under MSXDOSv1.x?

Cheers,

Guseco Smile

Login or register to post comments

By konamiman

Paragon (1173)

konamiman's picture

19-05-2011, 11:59

It should be, as MSX-DOS is backwards compatible with CP/M. I have never tried to run any CP/M software, tough.

By NYYRIKKI

Enlighted (5939)

NYYRIKKI's picture

19-05-2011, 12:32

Yes, only some more exotic disk routines may have some compatibility issues (ie CP/M set track, select disk, sector translate and read sector commands do just nothing or return error), but normal CP/M programs should run just fine with MSX-DOS. If there is possibility to select terminal emulation, you should select VT52.

By ARTRAG

Enlighted (6845)

ARTRAG's picture

19-05-2011, 16:55

The real problem is that msx1 has only 40 columns, where 90% of the old cp/m programs ask for 80 columns
Apart this, provided that the program does not use exotic disk routines, you have also to copy the cp/m files on msxdos disks (the file systems are different)

By Guseco

Expert (68)

Guseco's picture

20-05-2011, 08:52

A lot of thaks, for all the replies.
I had tried Microsoft Multiplan and works fine. The only problem is 40 column display

Best regards,

Guseco LOL!

By muffie

Paladin (933)

muffie's picture

20-05-2011, 15:49

You can use 80 columns on MSX2