One chip MSX improvement project

Page 78/118
71 | 72 | 73 | 74 | 75 | 76 | 77 | | 79 | 80 | 81 | 82 | 83

By KdL

Paragon (1415)

KdL's picture

20-05-2013, 07:46

many thx caro!
all files are restored now! thx @all Running Naked in a Field of Flowers Running Naked in a Field of Flowers Running Naked in a Field of Flowers

By caro

Champion (512)

caro's picture

20-05-2013, 08:01

Ace wrote:

I think the wave: out std_logic_vector( 9 downto 0 ) is the big issue here as I don't have this. I have wave: out std_logic_vector( 7 downto 0 ) like the real 1ChipMSX.

This is a mistake, as the summation of the three eight-bit channels result may not be as eight-bit. Otherwise the signals from less than four levels are equal to 0.

By KdL

Paragon (1415)

KdL's picture

08-11-2013, 18:52

..cof! ..cof! ..cof! Hannibal

Bad news:
The new Quartus II v13.1 declines the end of support to Cyclone I & II family.
The last good was the Quartus II v13.0sp1 Subscription Edition.

By Marcelo_Zoffy

Supporter (16)

Marcelo_Zoffy's picture

21-11-2013, 12:24

Hi,

First I like to thank to caro, KdL, HRA! and everyone involved in this great project!

I have a question about file "KEYMAP.VHD". I want to use my new MSX with a Brazilian ABNT2 keyboard (standard Brazilian keyboards).
I've found a suitable MSX2+ BIOS and it's working, but I still have to change the file "KEYMAP.VHD". Can someone please explain me, or point me some documentation how to "KEYMAP.VHD" works?

Thank you so much!

By x-nen Aivalahostia

Paragon (1437)

x-nen Aivalahostia's picture

15-01-2014, 17:21

Happy new Year to all Fpga users!!!
-What is the best way to replace msx dos to nextor?
-Is pssible add to Fpga code the Master system chips to use the like Franky cardige?
-Why don't work mglocm on the De1? this loader was designed for load roms on OCM.

Thanks

By ruizander

Supporter (14)

ruizander's picture

15-01-2014, 23:48

is it possible to boot altera de1 with latest caro firmware and msx1 bios? i'm trying to run some programs/games, but no luck with msx2 or msx2+ bios (the game Hundra on disk is an example.. after splash screen the game freezes during load). maybe some retrocompatibility issue? Obs: the very same game works ok on openmsx with fs-a1wsx machine selected.

i've tried to create a new bios with gradiente ddplus like this:

65.536 (00-07) (DISKBASIC)                       OCM-MEGASCSI.ROM
  32.768 (08-11) (MAIN-ROM) (Expert-DDPlus)        Expert-DDPlus-Basic-Bios.ROM
  16.384 (12-13) (EXT-ROM)  (FS-A1WSX) (MOD_$2C8D) MSX2PEXT.ROM
  16.384 (14-15) (SUB-ROM)  (FS-A1WSX)             MSX2PMUS.ROM
 131.072 (16-31) (KANJIDATA)                       OCM-KANJI-128KB.ROM
   8.192 (32)    (SLOT0-1) ($0000-$1FFF)           FREE.ROM
   8.192 (33)    (SLOT0-1) ($2000-$3FFF)           FREE.ROM
  32.768 (34-37) (SLOT0-1) ($4000-$BFFF)           MSXKANJI.ROM
   8.192 (38)    (SLOT0-1) ($C000-$DFFF)           FREE.ROM
   8.192 (39)    (SLOT0-1) ($E000-$FFFF)           FREE.ROM
   8.192 (40)    (SLOT0-3) ($0000-$1FFF)           FREE.ROM
   8.192 (41)    (SLOT0-3) ($2000-$3FFF)           FREE.ROM
  16.384 (42-43) (SLOT0-3) ($4000-$7FFF)           XBASIC2.ROM
   8.192 (44)    (SLOT0-3) ($8000-$9FFF)           FREE.ROM
   8.192 (45)    (SLOT0-3) ($A000-$BFFF)           FREE.ROM
   8.192 (46)    (SLOT0-3) ($C000-$DFFF)           FREE.ROM
   8.192 (47)    (SLOT0-3) ($E000-$FFFF)           FREE.ROM

the screen shows ok, but freezes there... no disk basic is acessible...
if i press SHIFT, i can go to basic perfectly though...

By KdL

Paragon (1415)

KdL's picture

16-01-2014, 17:20

Marcelo_Zoffy wrote:

Hi,

First I like to thank to caro, KdL, HRA! and everyone involved in this great project!

I have a question about file "KEYMAP.VHD". I want to use my new MSX with a Brazilian ABNT2 keyboard (standard Brazilian keyboards).
I've found a suitable MSX2+ BIOS and it's working, but I still have to change the file "KEYMAP.VHD". Can someone please explain me, or point me some documentation how to "KEYMAP.VHD" works?

Thank you so much!

hi! you can check the subfolder [scan_codes] of ocm-pld pack v3.2 Big smile

By KdL

Paragon (1415)

KdL's picture

16-01-2014, 17:25

x-nen Aivalahostia wrote:

Happy new Year to all Fpga users!!!
-What is the best way to replace msx dos to nextor?
-Is pssible add to Fpga code the Master system chips to use the like Franky cardige?
-Why don't work mglocm on the De1? this loader was designed for load roms on OCM.

Thanks

Hi!
- you can try with MegaFlashRomSCC cart
- no, the Master System VDP is too big!
- mglocm works with ocm-pld pack only because actually caro do not use my extensions & source code

By KdL

Paragon (1415)

KdL's picture

16-01-2014, 17:30

ruizander wrote:

is it possible to boot altera de1 with latest caro firmware and msx1 bios? i'm trying to run some programs/games, but no luck with msx2 or msx2+ bios (the game Hundra on disk is an example.. after splash screen the game freezes during load). maybe some retrocompatibility issue? Obs: the very same game works ok on openmsx with fs-a1wsx machine selected.

i've tried to create a new bios with gradiente ddplus like this:

65.536 (00-07) (DISKBASIC)                       OCM-MEGASCSI.ROM
  32.768 (08-11) (MAIN-ROM) (Expert-DDPlus)        Expert-DDPlus-Basic-Bios.ROM
  16.384 (12-13) (EXT-ROM)  (FS-A1WSX) (MOD_$2C8D) MSX2PEXT.ROM
  16.384 (14-15) (SUB-ROM)  (FS-A1WSX)             MSX2PMUS.ROM
 131.072 (16-31) (KANJIDATA)                       OCM-KANJI-128KB.ROM
   8.192 (32)    (SLOT0-1) ($0000-$1FFF)           FREE.ROM
   8.192 (33)    (SLOT0-1) ($2000-$3FFF)           FREE.ROM
  32.768 (34-37) (SLOT0-1) ($4000-$BFFF)           MSXKANJI.ROM
   8.192 (38)    (SLOT0-1) ($C000-$DFFF)           FREE.ROM
   8.192 (39)    (SLOT0-1) ($E000-$FFFF)           FREE.ROM
   8.192 (40)    (SLOT0-3) ($0000-$1FFF)           FREE.ROM
   8.192 (41)    (SLOT0-3) ($2000-$3FFF)           FREE.ROM
  16.384 (42-43) (SLOT0-3) ($4000-$7FFF)           XBASIC2.ROM
   8.192 (44)    (SLOT0-3) ($8000-$9FFF)           FREE.ROM
   8.192 (45)    (SLOT0-3) ($A000-$BFFF)           FREE.ROM
   8.192 (46)    (SLOT0-3) ($C000-$DFFF)           FREE.ROM
   8.192 (47)    (SLOT0-3) ($E000-$FFFF)           FREE.ROM

the screen shows ok, but freezes there... no disk basic is acessible...
if i press SHIFT, i can go to basic perfectly though...

the internal slot layout is intended for MSX2+ and the expanded slots are mapped... mmh? I think is not possible without a modified BIOS!

By ruizander

Supporter (14)

ruizander's picture

16-01-2014, 18:54

well, the bios used was msx2bios.rom released by caro:

md5 msx2bios.rom
MD5 (msx2bios.rom) = 31b91a5a0b4668da78aa36201d42c003

all i've done is overwrite the data with this bios:

md5 expert_ddplus_basic-bios1.rom
MD5 (expert_ddplus_basic-bios1.rom) = d13c1fc9ad4897c322f51aab3ad3b30d

and yes, this really happen: after turning on i press SHIFT on boot gradiente 1.1br screen (normally used to bypass diskbasic) and... tadaaa! i'm on basic...
i really couldn't tell if this msx2bios.rom is modified besides the mod $2C $8D, but i can send you the bios if you want to try... Wink

Page 78/118
71 | 72 | 73 | 74 | 75 | 76 | 77 | | 79 | 80 | 81 | 82 | 83