Yamaha side slot cartridge adapter - any interest?

Page 3/4
1 | 2 | | 4

By Grauw

Ascended (9824)

Grauw's picture

24-03-2019, 15:23

Even a cover! Awesome Big smile.

By Alexey

Guardian (3093)

Alexey's picture

28-03-2019, 13:40

I sent the first batch of notification messages to the buyers. Please check your e-mail.

The module needs to be attached to the computer's case with the screw, that used to hold the original module that came with the MSX. Please be careful when putting the screw through the module - don't force it. If it doesn't go in easily, rotate it clockwise and apply a little pressure.

By Alexey

Guardian (3093)

Alexey's picture

01-04-2019, 02:56

A piece of advice to those who will get the adapter soon (few first ones have been shipped) - please do not tighten the center screw too much. Once the bottom cover starts to move down with the screw, it's enough to hold the module in place. If you tighten the screw too much, you risk to damage the bottom cover.

Also a notice to those who didn't reply to my mail about the adapter - your reservation will expire in the end of this week. Then I will sell the adapters that were not claimed to other people.

By Alexey

Guardian (3093)

Alexey's picture

04-04-2019, 10:52

The project files have been released into the RBSC's repository:

https://github.com/RBSC/SideSlotCartridgeAdapter

The 3D model is available here:

https://www.thingiverse.com/thing:3538707

The last 2 modules are reserved to the buyers who expressed interest. On Saturday I will sell them to whoever wants to purchase those.

By Grauw

Ascended (9824)

Grauw's picture

04-04-2019, 00:25

Received it today, looks very nice! Got a nice heft to it too, more than I expected, feels pretty solid. And the slot cover is a nice touch Smile.

By Alexey

Guardian (3093)

Alexey's picture

07-04-2019, 14:09

The last 2 modules are for sale for 39 Euro + 7 Euro shipping. First come, first served. Smile

By max_iwamoto

Hero (517)

max_iwamoto's picture

07-04-2019, 16:39

Hi, Alexey!

I will take those 2. I was confused that you sending them to me with the Gotek. I guess I was drinking too much Smile

Max

By Alexey

Guardian (3093)

Alexey's picture

03-05-2019, 20:45

All modules are sold out. If someone wants to make a commercial batch, please contact me first.

By Alexey

Guardian (3093)

Alexey's picture

02-05-2019, 00:18

I put the model of the side slot cover into the RBSC's repository.

By bsittler

Master (227)

bsittler's picture

09-05-2021, 19:36

Hi! Is there a possibility for another batch of these? I would like to make more regular slots available on some Yamaha computers but I don't have a 3D printer. I am interested in buying three of them already assembled if another batch becomes possible

Page 3/4
1 | 2 | | 4