Ethernet cartridge for MSX

Page 2/7
1 | | 3 | 4 | 5 | 6 | 7

By konamiman

Paragon (1172)

konamiman's picture

13-05-2009, 18:13

I have took a quick look at the W5100 datasheet, and if I understood correctly, this controller can be used as a plain raw Ethernet controller, by using socket 0 in MACRAW mode. This is all what is needed for an Ethernet UNAPI implementation.

By DD

Expert (88)

DD's picture

14-05-2009, 14:06

www.pa4den.nl/MSX/IMG_2427.JPG
www.pa4den.nl/MSX/IMG_2429.JPG

By Latok

msx guru (3867)

Latok's picture

14-05-2009, 14:39

*drooooool*

By karloch

Prophet (2157)

karloch's picture

15-05-2009, 00:19

O_o WTF

By sunrise

Paragon (1091)

sunrise's picture

15-05-2009, 07:20

I am lucky to have one ,superb , the diagtool works as expected.
Time to start all necessary preparations to make it Sw programming, label, offer for the pcb costs etc

Running Naked in a Field of Flowers

By doraemonppc

Master (244)

doraemonppc's picture

15-05-2009, 15:11

Nice!
I prefeer the Harware with case Smile

By karloch

Prophet (2157)

karloch's picture

15-05-2009, 16:52

Make it compatible with InterNestor Lite please! I can't wait to get one.

By DD

Expert (88)

DD's picture

15-05-2009, 17:01

They are only with a case now, no plain PCB's. All are like the last pictures.

By Manuel

Ascended (18782)

Manuel's picture

15-05-2009, 21:16

sunrise: great!! Smile I hope you already found people who want to help with the software.

By Sd-Snatcher

Hero (582)

Sd-Snatcher's picture

15-05-2009, 21:35

For a future batch of interfaces i suggest to change the place of the rj45, i think this is the worst place for almost all the msx models, i think i must be in a side like in obsonet or the rs232.

- For upper slots the cable is in front of the screen.
- For back slot you cant put the msx near to screen.
- For Front slot the cable goes to the keyboard.
- For side slot you need a lot space in that side.

Page 2/7
1 | | 3 | 4 | 5 | 6 | 7