Bad Apple for MSX please

Page 6/8
1 | 2 | 3 | 4 | 5 | | 7 | 8

By Grauw

Ascended (9762)

Grauw's picture

05-02-2021, 17:33

Mr.Mouse wrote:
Grauw wrote:

Hi Mr.Mouse, see my posts in this thread, as well as D.S.A.’s explanation. If you have any further questions let me know!

The other OPLs should also have the same test register function (in register 1 instead of register 15), however you need to double the setting for the multiplier because they have one more phase bit than the OPLL. Because a multiplier of 24 can’t be set, only the technique with dc-offset can be used.

I do have some more questions, can I email you? :)

Of course!

By SjaaQ

Master (203)

SjaaQ's picture

05-02-2021, 19:26

By Latok

msx guru (3821)

Latok's picture

05-02-2021, 21:51

Thanks SjaaQ, I also converted them to badappop.img files and they worked with viewopll.bas as well.

Unfortunately, I am using MegaFlashROM SCC+ SD and I get a substantial slow down in playback. Especially the music sounds pretty bad.

Does anyone know why this happens? Playback only works correctly with MEGASCSI or something? Or can I change some settings somehow to make it run more fluently?

By Latok

msx guru (3821)

Latok's picture

05-02-2021, 21:42

Grauw wrote:

Manuel Pazos also posted a Bad Apple FMV on twitter:

Quote:

New Bad Apple video (Z80, SCREEN 5 256x192, about 30 fps, PCM 15.7 kHz played using the OPLL)

https://youtu.be/fdkBV9GjX30

It uses the MSX-MUSIC to play the PCM. It also seems to use a new function of the MegaFlashROM SCC+ SD FPGA (needs to be updated I think), I’m guessing it’s for streaming data from disk?

I now read this. Do I need to update my MegaFlashROM SCC+ SD FPGA? Is this update already released? And if yes, where to find it and how to update? Can't wait ^_^

By SjaaQ

Master (203)

SjaaQ's picture

05-02-2021, 21:54

I got it working with ext "fmpac", not on the GT emulation in OpenMSX. Will try some flashcards tomorrow. I have the MFR, GR8NET and and Carnivore2 to try it on.

By Grauw

Ascended (9762)

Grauw's picture

05-02-2021, 22:11

Latok wrote:

Do I need to update my MegaFlashROM SCC+ SD FPGA? Is this update already released? And if yes, where to find it and how to update? Can't wait ^_^

Maybe Guillian can chip in?

By SjaaQ

Master (203)

SjaaQ's picture

06-02-2021, 11:19

Well, did some testing. On the SX1+mini I was not able get it working, except on 8Mhz with the MFR. Every time I ran it at 3.5 it threw an error 3 or 4 (mostly depending on if you use OPLL or PCM). The 8Mhz SX1+MFR setup had unrecognizable sound and corrupted graphics, but it did something.

On my NMS8280 I only got it working on the MFR and a Panasoft FM-Pac. It was too slow however and there was a lot variation in the sample frequency of the sound. Running at 7.14Mhz did nothing.

I tried it together with the MFR+Carnivore 2 but was not able to get it booting. So it works better on OpenMSX than real hardware.

By tfh

Prophet (2838)

tfh's picture

06-02-2021, 11:43

SjaaQ wrote:

So it works better on OpenMSX than real hardware.

What setup do you use in OpenMSX to get it working?

By Guillian

Prophet (3424)

Guillian's picture

06-02-2021, 12:19

Grauw wrote:
Latok wrote:

Do I need to update my MegaFlashROM SCC+ SD FPGA? Is this update already released? And if yes, where to find it and how to update? Can't wait ^_^

Maybe Guillian can chip in?

The FPGA configuration needs to be updated. This can be done using a Xilinx programming cable, or sending the cartridge to me.
From this update on, it will be possible to update the FPGA from the MSX itself.

Page 6/8
1 | 2 | 3 | 4 | 5 | | 7 | 8