FLLOAD improved!

Page 6/6
1 | 2 | 3 | 4 | 5 |

By ericb59

Paragon (1079)

ericb59's picture

20-07-2022, 16:14

Quote:

I had done it for Eric's project which apparently never came to fruition.

The 26F016 board is reality , I used often the tool you made for it.
Another big thank to you. Wink

By pakoto

Resident (50)

pakoto's picture

20-07-2022, 16:16

gdx wrote:

Normally only versions that need to be patched are.
Which Rom do you want to load?

Konami megaroms patched to use scc from second slot. I have rbsc multimapper and original scc konami with switch to disable rom into second slot.

By pakoto

Resident (50)

pakoto's picture

22-07-2022, 21:32

Patch created by BiFi for nemesis 3 works ok with your FL16.COM and multimapper RBSC, using a scc cart with rom off at second slot.

https://github.com/RBSC/Konami-SCC-Cartridge-Repair/tree/mas...

By gdx

Enlighted (5588)

gdx's picture

23-07-2022, 16:58

You are either wrong about FL16.COM or BiFi's patches usage!

SCC games patched by BiFi are designed to allow use of SCC sound chip from slot 2 keeps. They don't change the Rom mapper type.

BiFi's patches are for using a megaflashrom with an SCC mapper but without a sound chip (eg. Konami SCC Cartridge Repair Board). The SCC sound is played by inserting an original SCC cartridge into slot 2 thank to the patch. FL16.COM meanwhile is used to load a ROM into a Megaflashrom having the ASCII16 mapper. So it's normal if it doesn't work. You have to use but FL.COM.

Also be aware that this method slows down the games a bit because two slot changes are required each time the sound chip is accessed.

By pakoto

Resident (50)

pakoto's picture

23-07-2022, 18:15

Yes. Solved using ascii8 mapper patched konami roms, selecting a8 jumper into RBSC Multimapper 2Mb, and my old scc game with switch, and... works!

By Bastion Rebel

Expert (78)

Bastion Rebel's picture

05-08-2022, 07:40

hello this is my new MegaFlashRom 16Mb (2048ko)

flash SupermarioWorld 2048ko

but dont work, start , and bug , im suppose is mapper is not K4 , is K5 SCC or SCC + SCC I ???

By Bastion Rebel

Expert (78)

Bastion Rebel's picture

05-08-2022, 07:41

FL work fine .. Good Job GDX THANK

By gdx

Enlighted (5588)

gdx's picture

05-08-2022, 10:35

Good job! Mapper of your FlashRom is KonamiSCC finally. I thought it was Konami8 (aka Konami 4).

If you want run this game on MSX and with playing of some SCC sounds, you can use that, a MFR or C2. Popolon's Sound Cartridge is even interesting with a MFR or C2 because it allows us to play games enhanced with an SCC voice set. It allows also to play SD Snatcher on any MSX2/2+ without memory mapper by using any flash card interface that have one.

Page 6/6
1 | 2 | 3 | 4 | 5 |