DIY game cartridge

Por SkalTura

Champion (354)

Imagen del SkalTura

28-03-2017, 16:29

Looking for the schematics to make a simple game cartridge for MSX1 ROM's.
I can remember that there was an article in a Dutch electronics magazine a very long time ago that did this, but I can't seen to find it anywhere...

It looked at lot like the picture in this topic: https://www.msx.org/forum/msx-talk/hardware/msx-eprom-cart-t...

Anyone have the article by any change ?

Login sesión o register para postear comentarios

Por Jipe

Paragon (1551)

Imagen del Jipe

28-03-2017, 19:25

http://msxvillage.fr/download/?url=/16-elektor/102-elektor-n...
is in Elektor Magazine search the same in your favorite language

Por SkalTura

Champion (354)

Imagen del SkalTura

28-03-2017, 19:45

Yes that's it...
Many thanks !

Por Wlcracks

Champion (470)

Imagen del Wlcracks

02-04-2017, 19:54

I had problems with this design with 32k eeproms and flash,29c256 and28c256. These chips will set at 0000-7fff. line a14 needs to be swapped with a15 at pin1 or pin 27. 28c256 dont work at all in this design the 29c256 will but, as mentioned, at the "wrong" pages.

Por roadfighter

Champion (437)

Imagen del roadfighter

04-04-2017, 22:20

Maybe this article on mrc is also something to look at.
Eprom cart for testing
I have some Eprom cartridges left to.

Por roadfighter

Champion (437)

Imagen del roadfighter

05-04-2017, 19:24

roadfighter wrote:

I have some Eprom cartridges left to.

Sorry i meant i have some Eprom PCB's the are without casing.

Por amigo-mexicano

Supporter (5)

Imagen del amigo-mexicano

18-04-2017, 17:54

Hello roadfighter, do you still have Eprom PCBs for sale? Thanks

Por roadfighter

Champion (437)

Imagen del roadfighter

22-04-2017, 10:54

Yes PCB's are still for sale.

Por SkalTura

Champion (354)

Imagen del SkalTura

09-05-2017, 07:28

Wlcracks wrote:

I had problems with this design with 32k eeproms and flash,29c256 and28c256. These chips will set at 0000-7fff. line a14 needs to be swapped with a15 at pin1 or pin 27. 28c256 dont work at all in this design the 29c256 will but, as mentioned, at the "wrong" pages.

I'm using this article only as reference. I want to design a cartridge myself for my MSX1, so some experimenting is required anyway.
Any articles on "bank switching" with bigger ROM's is also welcome by the way...

Por roadfighter

Champion (437)

Imagen del roadfighter

09-05-2017, 19:24

@ WLcracks, or you swap the uper and lower 16k in the eprom when burning.
The pcb's i hve you can set a jumper from pin1(A15)to msx A14, A15 or + 5volt or ground.
Also for Pin 27(A14).

Por Wlcracks

Champion (470)

Imagen del Wlcracks

10-05-2017, 07:33

Schematics for reference

32k