Help with video out

Página 2/2
1 |

Por Eugeny_Brychkov

Paragon (1217)

Imagen del Eugeny_Brychkov

07-09-2013, 19:36

I see that you know what you are talking about.

I think soldering C14 will not solve the issue. Schematic shows that V-out of HIC1 board should have 2.5V DC. You say it is steady 5V. I am afraid you will need to replace CXA1145. Go to Ebay and search. I saw there're some available from HK for about $3. Can you replace the chip yourself?

Or, returning to the fact that you have two machines, and if you are skilled in desoldering/soldering, you can take HIC board from machine with damaged connectors, and put in this one. If it will not work or machine will look "worse" than that one, just return the board back to that machine.

Por bazabaza

Expert (70)

Imagen del bazabaza

08-09-2013, 05:53

I'm not skilled in soldering, I'm beginner in electronics, practiced on separate boards and looked information and videos online. that's why I don't feel comfortable using parts from the other machine for now at least. I'll try to replace the chip and see, I'll order from ebay

Thanks for the great help!

Página 2/2
1 |