RISKY RICK FOR MSX !!! (post to make it a reality)

صفحة 21/25
14 | 15 | 16 | 17 | 18 | 19 | 20 | | 22 | 23 | 24 | 25

بواسطة Grauw

Ascended (10633)

صورة Grauw

12-01-2020, 18:07

Matthew Splett wrote:
Matthew Splett wrote:

Oh, and all the joystick 1 port isn't used??? it seems it has to be plugged into joystick 2 port? I haven't run across any other MSX games that behave like that.

They say standard 2 button MSX controller should work. They don't know why for some it is joystick 1, and others joystick 2. Maybe that's an MSX standards issue?

If it reads the PSG registers directly, the BIOS interrupt routine leaves joystick port 2 selected when it returns. The solution is to either use the BIOS to read the joystick, or to make sure to select port 1 prior to reading its values, and keep interrupts disabled while doing so.

بواسطة Matthew Splett

Supporter (14)

صورة Matthew Splett

12-01-2020, 21:18

Yep, it seems they are not reading the MSX port the standard way... If I wire a joystick so the common is connected to ground instead of MSX joystick port pin 8 ( the output/select pin ) then JOYTEST, HIDTEST don't read the joystick correctly, but RISKY RICK movement works. Sad

If I wire it per this info: https://www.msx.org/wiki/General_Purpose_port then it doesn't work in RISKY RICK, but it works with all our other software...

This agrees with what Grauw suggests.

-M@

بواسطة sunn

Expert (101)

صورة sunn

09-02-2020, 11:46

Can you guys with reversed joystick ports please tell what machine do you have? I encountered this trouble with JVC HC-7GB. I have this behaviour in XRacing (msxdev 18 contest winner) and Konamis vintage King’s Valley.

بواسطة sunn

Expert (101)

صورة sunn

10-02-2020, 05:51

In JVC the joystick ports are numbered #2, #1. The one closer to the rear of the machine is #1. I looked at the manual to find this info. Never seen that before.

بواسطة J.M.F

Resident (56)

صورة J.M.F

31-05-2020, 11:38

On June 25 it goes on sale.

بواسطة QBee Sam

Champion (281)

صورة QBee Sam

11-08-2020, 13:21

I suppose the big delay is Covid19 related, but, is the physical cartridge project still alive?

بواسطة J.M.F

Resident (56)

صورة J.M.F

23-02-2021, 12:52

Hello, from what I understand you do intend to publish the physical edition. Now, it is hard to understand or justify a delay of almost a year even with COVID-19.

بواسطة TotO

Rookie (24)

صورة TotO

14-01-2022, 14:50

@QBee Sam : The boxes was printed and the cartridges will start to be assembled soon.

بواسطة TotO

Rookie (24)

صورة TotO

14-01-2022, 14:48

Quote:

Now, it is hard to understand or justify a delay of almost a year even with COVID-19.

@J.M.F Just inappropriate remark. Nothing to justify to you.

بواسطة ro

Scribe (4811)

صورة ro

14-01-2022, 16:11

Hai Tot0, sounds cool as it is finally happening. let's spend some time and write a descent news post about that, eh? for that, we need some info ofcourse. Perhaps you could get in touch.

Meanwhile, the digi edition is available here http://www.arcadevision.net/msx.html

صفحة 21/25
14 | 15 | 16 | 17 | 18 | 19 | 20 | | 22 | 23 | 24 | 25