wrong detection?

بواسطة bartl68

Expert (86)

صورة bartl68

14-03-2011, 08:16

i have managed to connect the scart from a nms8250 to a acer vga display, but the acer detects 640x200 at 50hz, any way to let the acer detect the right output of the nms?

Login أوregister لوضع تعليقاتك

بواسطة Metalion

Paragon (1529)

صورة Metalion

14-03-2011, 13:27

AFAIK, your acer is probably a PC dedicated screen, and thus running at a 31KHz horizontal frequency, which is incompatible with an MSX output. The video output of those old computers were tuned for use on a regular TV or an old school monitor, both running at a 15KHz horizontal frequency.

بواسطة bartl68

Expert (86)

صورة bartl68

14-03-2011, 13:34

@Metallion, ok, but i got a good sharp screen, but i miss a few chars at the left

بواسطة ARTRAG

Enlighted (6845)

صورة ARTRAG

14-03-2011, 13:40

try from basic the command
set adjust (X,Y)
where X and Y are the offset you want

It could help in moving the screen right up to 15 pixels

بواسطة bartl68

Expert (86)

صورة bartl68

15-03-2011, 09:06

@ARTRAG

thats not it, just see my output to vga on lcd at : http://www.mijnalbum.nl/index.php?m=albumview&a=1&key=C7RU3ML3&album=NPZFOWBC

بواسطة Metalion

Paragon (1529)

صورة Metalion

15-03-2011, 11:21

There's nothing you can do to improve the situation ...
You cannot change the video output of the MSX, and you cannot change the detection of the ACER !!

The only way is to process the video output of the MSX thru a VGA box.
http://en.wikipedia.org/wiki/VGA_box

بواسطة bartl68

Expert (86)

صورة bartl68

12-07-2011, 10:31

There's nothing you can do to improve the situation ...

You cannot change the video output of the MSX

well finally you can!, you can do it with this board at :> http://www.zonadepruebas.com/modules/smartsection/item.php?itemid=1225 <: with good results !!


, and you cannot change the detection of the ACER !!

The only way is to process the video output of the MSX thru a VGA box.
http://en.wikipedia.org/wiki/VGA_box

بواسطة sd_snatcher

Prophet (3509)

صورة sd_snatcher

12-07-2011, 15:05

@bartl68

The screen looks very fine to me. The proportion is right, and the screen is just a bit shifted to the left. Probably the monitor is doing the right thing, but the firmware don't have a screen to identify the mode correctly.

Don't your monitor have the "Auto" button, that adjusts the heigh/width of the image automatically? Sometimes it's a menu option, check its manual. If it don't have the "Auto" option, just open the monitor menu and adjust the image settings manually.

I'm curious: Does your monitor works fine with 60Hz games too?

بواسطة dhau

Paragon (1570)

صورة dhau

13-07-2011, 01:46

I usually hit my commodore 1084 pretty hard and it starts working. But I only used my hands, no crowbars or sledgehammers.

بواسطة bartl68

Expert (86)

صورة bartl68

13-07-2011, 08:38

@sd_snatcher

both modes work 50hz & 60hz with this board.

and my monitor has an auto button ;-)

بواسطة Eugeny_Brychkov

Paragon (1202)

صورة Eugeny_Brychkov

14-07-2011, 12:55

@sd_snatcher

both modes work 50hz & 60hz with this board.

and my monitor has an auto button ;-)
How did you connect? Please share schematics.