HD Image for the Beer IDE interface

This Zip contains a bootable HD Image of 4 partitions with MiSiX installed for the Beer IDE interface.

This image can be used to initialize an Compact-Flash with BEERIDE.EXE or to emulate the Beer IDE interface on OpenMSX.
Copy hd.dsk to the ~/persistent/Beer_IDE/untitled1 folder of OpenMSX for example.

المرفق	الحجم	التنزيلات	آخر الملفات المحملة
Beer_Bootable_HD_Image.zip	‏6.3 م.بايت	207	منذ يوم واحد أقل من ساعة

التعليقات (4)

بواسطة st1mpy

Paladin (956)

28-07-2022, 20:19

How big is the whole disk image (what size CF is this for)?

بواسطة Manuel

Ascended (19805)

29-07-2022, 00:28

Check the readme file that comes with it:

Quote:

HD.DSK is an hard-disk image from an 128MB Compact-Flash (4 partitions with
MiSiX installed and bootable) for the Beer IDE interface v2.02 (firmware v1.9).

You can import it to a 128MB Compact-Flash (not tested with larger CF) using
BEERIDE.EXE by renaming the "DSK" extension by "DMP". .

This hard-disk image can be used on OpenMSX to emulate the Beer IDE interface.
Copy hd.dsk to the ~/persistent/Beer_IDE/untitled1 folder.

Warning: Do not mount it under MacOS above v.10.6 (Snow Leopard) because they
modifiy the partitions table without warning.

بواسطة st1mpy

Paladin (956)

30-07-2022, 21:55

I renamed the hd.dsk to hd.dmp. When I do the Load Dump on BeerIDE 202 tool, it only shows 2 partitions and they are empty...

بواسطة ATroubleshooter

Expert (119)

09-05-2023, 23:32

st1mpy wrote:

I renamed the hd.dsk to hd.dmp. When I do the Load Dump on BeerIDE 202 tool, it only shows 2 partitions and they are empty...

That's because you probably have the firmware v1.8 - it has it's custom Partition Table format, which is not fully compatible with the standard MS-DOS MBR format that v1.9 firmware uses.

PS: oh, wait - is it the BEERIDE.EXE tool which's having the issue, let alone 1.8 ROM?

HD Image for the Beer IDE interface

Share

التعليقات (4)